Multitasking

MAZAK INTEGREX 200 MULTITASKING MACHINE WITH LOWER TURRET
A 9-axis machine with absolute position reading on optical lines – no encoder – for absolute accuracy, repeatability ’0.0015mm, refrigeration at the centre, pressure at 20 bar, housing 40-positions on the milling and turning head, and 9-position for the lower turret (only turning), ASA 6 double mandrel, with the same line bearing head, to have 2 mandrels working with equal performance, and not a primary head and recovery head.
MULTITASKING MACHINE MAZAK INTEGREX 100 WITH SECOND SPINDEL
A 7-axis machine with absolute position reading on optical lines – no encoder – for absolute accuracy, repeatability ’0.0015mm, refrigeration at the centre, pressure at 20 bar, housing 40-positions on the milling and turning head , and 9-position for the lower turret (only turning), ASA 6 double mandrel, with the same line bearing head, to have 2 mandrels working with equal performance, rather than a primary head and recovery head.
NR INTEGREX 200S with GANTRY ROBOT
Machinery with 9 axes controlled by CNC, with piece uploading and downloading, laser automatic measurement system (marposs), self-correction of the parameters based on the machinery measurements, high pressure refrigerating system (75 bar) filtered and thermo-controlled, position system with optical lines (0.002mm precision), 82 tools available.
NEW INTEGREX I-200 S
Two-spindle Multitasking Mazak Integrex i200 Machine

The Two-Spindle Multitasking Mazak Integrex i200 machine, on which was installed a gantry loader with sixteen pallet to work in automatic mode, it’s equipped with the fifth generation multi- tasking Mazak technology; it is characterized by a large work area and high precision performance, over an ergonomic design .

The MAZAK INTEGREX i200 is able to complete the entire process – from raw material to finished product – in a single placement machine, and this is also due to the large integrated tool magazine of 110 workstations . The spindle of high-speed milling, of advanced design, can take up to 240 -degree angles and the two electro-spindles contributes to a machining flexibility unparalleled.

In addition, the large X-axis ( 615mm to 125mm excursion over the zero spindle) and the Y-axis improved ( 250mm stroke) are designed to further facilitate the use of the machine.

The  B-axis indexing and positioning of the cutter head allows increments of 0.0001 ° due to the coupling between the shaft and gear camshaft bearings and linear scales in standard.

The Mazak Integrex i- 200 was equipped with a Renishaw probe for automatic measurements during the machining process , which allow to run already finished products in the machine, having a tolerance of 0.002 mm.

The union between the precision offered by the machine, the gantry loader and the Renishaw probe allow us to move from the rough bar to the finished product, milled in three positions, in a single cycle totally automated.